Marker Post Extractor

#08-102
19"H x 9"W x 8"D
24 lbs.

A standard, proven design that has been used for years, the Marker Post Extractor can be used to remove both full length Marker Posts or broken stubs. It works on all of our Marker Posts and Snow Poles, and will work on similar competitor's products, as well.

• Manufactured of heavy gauge steel tube and plate.
• Two separate pieces (the body and the tube handle) aid in portability. The handle attaches with a securing bolt and nut (included).
• Easy to use, it operates with a pumping action similar to a car bumper jack. First, attach and secure the handle, then place the Marker Post Extractor next to the Fiberglass Marker Post that is to be removed. Lift the handle so the cam jaws open, and straddle the edge of the Marker Post with the cam jaws. Pushing the handle down causes the cam jaws to grab the Marker Post and lift it about an inch out of the ground. Raising the handle releases the cam jaws and allows the mechanism to slide down the post and be ready for another grip.
• Painted safety orange for visibility and safety.

Power Flex Gloves

#08-1026
Power Flex Gloves in 4 sizes.

A perfect assembly glove for carrying Marker Post boxes, drive tools and installing our Fiberglass Marker Posts. The superior grip has a tough tactile coating on the palms that provides cushioning and make heavy lifting seem easier. Choose from four sizes. In gray/blue. Price is per pair.
$6.00

Standard Marker Post Driver With Foam Rubber Grips

#08-103
44"H x 10"W x 1.5"D
24 lbs.

This Marker Post Driver is designed for DUAL-Flex, TRI-Flex, GLAS-Flex, ARC-Tec, Sign Posts (and all similar competitor's products) measuring 62" and longer. (This driver does not work on Snow Poles--see our Snow Pole Driver, part #08-108.)

• Constructed of heavy gauge steel for durability, and for optimum weight and balance for less effort on your part while driving the Marker Posts.
• Foam rubber grips offer comfort and shock absorption. (For a more durable grip, see our Deluxe Marker Post Driver, part #08-146.)
• Prevents "post whip" while driving the post. The longer the Post Driver, the more the driver will contain the post and prevent post whip. To further prevent post whip, keep your foot against the lower side of the Marker Post while driving.
• Powder coated in safety orange for safety and durability.

Pilot Hole Driver

#08-104
64"H x 4"W x 2"D
32 lbs.

The Pilot Hole Driver is a must to prepare a slotted hole in rocky or very dense soil without splitting your Fiberglass Marker Post.

• Made of heavy gauge steel for durability and optimum weight for less effort on your part.
• May be used for all Marker Posts except Snow Poles (see our Snow Pole Pilot Driver, part #08-188).
• Helps locate rocks and other debris under the soil surface, allowing you to change the location of the pilot hole before driving and splitting a Fiberglass Marker Post.
• Powder coated in safety orange, for safety and durability.

Boundary-Survey Marker Driver - 44 Inch

#08-106
44"H x 8"W x 1.5"D
17 lbs.

An exclusive Rockart Signs and Markers design, this driver installs only Rockart 2.5" wide Boundary/Survey Markers (and similar competitor's Boundary Markers), 60" and longer. (For shorter Boundary/Survey Markers, please see our part #08-107.)

• Made of rigid steel for durability, but designed to be lightweight for portability.
• Designed and balanced to be carried by the handle for remote marking.
• For Marker Posts shorter than 48", the driver end may be shortened (permanently) with a steel chop saw.
• Powder coated in safety orange for safety and durability.

Boundary-Survey Marker Driver - 30 Inch

#08-107
30"H x 8"W x 1.5"D
13 lbs.

An exclusive Rockart Signs and Markers design, this driver installs only Rockart 2.5" wide Boundary/Survey Markers (and similar competitor's Boundary Markers), 48" to 60" long. (For longer Boundary/Survey Markers, please see our part #08-106.)

• Made of rigid steel for durability, but designed to be lightweight for portability.
• Designed and balanced to be carried by the handle for remote marking.
• For Marker Posts shorter than 48", the driver end may be shortened (permanently) with a steel chop saw.
• Powder coated in safety orange for safety and durability.

Snow Pole Driver - 72 Inch

#08-108
72"H x 1.5"W x 1.75"D
8 lbs.

Designed for Rockart Signs and Markers Snow Poles (and similar competitor's rigid fiberglass snow poles) over 8 feet long. (For shorter Snow Poles, see our part #08-186.)

• Made of rigid steel tubing with a weighted top, but designed to be lightweight for portability.
• For Snow Poles shorter than 8 feet, the driver end may be shortened (permanently) with a steel chop saw.
• Works best when used with our Snow Pole Pilot Hole Driver, part #08-188.
• Powder coated in safety orange for safety and durability.

Stainless Steel Anchor Hole Drill Guide - For Rock-Flex and Flex-Flange Anchors

#08-113
Stainless Steel Drill Guide - for drilling anchor holes in our Fiberglass Markers.
$13.00

Light Weight Post Driver

#08-136
44"H x 8"W x 1.5"D
22 lbs. fully assembled

An exclusive Rockart Signs and Markers design, this Post Driver easily breaks down into 8 pieces which can be distributed among 6 to 8 people for ease of transporting to remote locations.

• Can be assembled or disassembled in one minute.
• Manufactured of durable, heavy gauge aluminum (the body) and steel, with an optimum weight and balance for less effort on your part.
• When disassembled, the individual part weights range from 7.4 lbs. (the heaviest piece, which is the aluminum body), to 2.2 lbs. for the top bar.
• Two spare stainless steel bolts and one assembly tool are included.
• Installs the same Marker Posts as our Standard Driver (#08-103), in lengths of 62" or longer.
• Each piece is powder coated in safety orange for safety and durability.

Deluxe Marker Post Driver With Steel Coil Grips

#08-146
44"H x 10"W x 1.5"D
26 lbs.

A new, exclusive Rockart Signs and Markers design, it's just like our Standard Marker Post Driver (#08-103), but with pinch-free, durable steel coil grips that won't wear out. Designed for DUAL-Flex, TRI-Flex, GLAS-Flex, ARC-Tec, Sign Posts (and all similar competitor's products) measuring 62" and longer. (This driver does not work on Snow Poles--see our Snow Pole Driver, part #08-108.)

• Constructed of heavy gauge steel for durability, and for optimum weight and balance for less effort on your part while driving the Marker Posts.
• The steel coil grips are welded in place, and cushioned from each other with a powder coating, preventing any pinching. They offer very good shock absorption, and last as long as the driver does, without chipping, peeling or coming off like foam rubber grips can.
• This driver prevents "post whip" while driving the post. The longer the Post Driver, the more the driver will contain the post and prevent post whip. To further prevent post whip, keep your foot against the lower side of the Marker Post while driving.
• Powder coated in safety orange for safety and durability.

Campground Marker Post Driver - 30 Inch

#08-153
30"H x 10"W x 1.5"D
19 lbs.

Another new, exclusive Rockart Signs and Markers design. Very similar to our Deluxe Marker Post Driver, but sized perfectly for our 48" Markers and our 54" Campground Markers. (This driver does not work on Snow Poles--see our Snow Pole Driver, part #08-108.)

• Constructed of heavy gauge steel for durability, and for optimum weight and balance for less effort on your part while driving the Marker Posts.
• Steel coil grips are welded in place, and cushioned from each other with a powder coating, preventing any pinching. They offer very good shock absorption, and last as long as the driver does, without chipping, peeling or coming off like foam rubber grips can.
• This driver prevents "post whip" while driving the post. The longer the Post Driver, the more the driver will contain the post and prevent post whip. To further prevent post whip, keep your foot against the lower side of the Marker Post while driving.
• It may be used to drive longer Marker Posts, if transportation weight is an issue, but post whip could be a problem.
• Powder coated in safety orange for safety and durability.

Campground Marker Post Driver - 22 Inch

#08-160
22"H x 10"W x 1.5"D
16 lbs.

Another new, exclusive Rockart Signs and Markers design. It's just like our Campground Marker Post Driver (#08-153), but shorter, to drive 36" folia identification markers and 48" Rural Emergency 911 markers. (Can also be used to drive 54" Campground Markers but post whip may be an issue.) (This driver does not work on Snow Poles--see our Snow Pole Driver, part #08-108.)

• Constructed of heavy gauge steel for durability, and for optimum weight and balance for less effort on your part while driving the Marker Posts.
• Steel coil grips are welded in place, and cushioned from each other with a powder coating, preventing any pinching. They offer very good shock absorption, and last as long as the driver does, without chipping, peeling or coming off like foam rubber grips can.
• This driver prevents "post whip" while driving the post. The longer the Post Driver, the more the driver will contain the post and prevent post whip. To further prevent post whip, keep your foot against the lower side of the Marker Post while driving.
• It may be used to drive longer Marker Posts, if transportation weight is an issue, but post whip could be a problem.
• Powder coated in safety orange for safety and durability.

Marker Post Drive Cap

#08-175
3.5"H x 5"W x 1.5"D
2 lbs.

Another new, exclusive Rockart Signs and Markers design, the Marker Post Drive Cap is placed over the top of a Fiberglass Marker Post, to protect the post, while you use a hammer or rock to drive the post into the ground. It works with our DUAL-Flex, TRI-Flex, GLAS-Flex, ARC-Tec, Sign Posts, Campground Markers, Boundary/Survey Markers, 36" Folia Identification Markers and 48" Rural Emergency 911 Markers (and all similar competitor's products).

• Constructed of heavy gauge steel for durability, and for optimum weight.
• The light weight is ideal for transporting to remote locations.
• To prevent post whip, keep your foot against the lower side of the Marker Post while driving.
• Powder coated in safety orange for safety and durability.

Steel U-Channel Driver

#08-180
32"H x 12"W x 4"D
42 lbs.

Another new, exclusive Rockart Signs and Markers design, for our new 1 lb. and 2 lb. Steel U-Channel Delineator Posts which are ideal for larger signs.

• Constructed of heavy gauge steel and 4" Schedule 40 pipe to provide durability plus optimum weight and balance for less effort on your part.
• On the handles, steel coil grips are welded in place, and cushioned from each other with a powder coating, preventing any pinching. They offer very good shock absorption, and last as long as the driver does, without chipping, peeling or coming off like foam rubber grips can.
• Powder coated safety orange for safety and durability.

Short Snow Pole Driver - 12 Inch

#08-186
12"H x 1.5"W x 1.75"D
8 lbs.

Designed for Rockart Signs and Markers Snow Poles (and similar competitor's rigid fiberglass snow poles) shorter than 8 feet. (For longer Snow Poles, see our part #08-108.)

• Made of rigid steel tubing with a weighted top, but designed to be lightweight for portability.
• Can be used when our standard Snow Pole Driver is difficult to transport.
• Works best when used with our Snow Pole Pilot Hole Driver, part #08-188.
• Powder coated in safety orange for safety and durability.

Snow Pole Pilot Hole Driver

#08-188
72"H x 1.5"W x .5"D
5 lbs.

Another exclusive Rockart Signs and Markers design, and ideal for creating pilot holes when you are driving Snow Poles directly into the soil.

• Constructed of rigid, solid aluminum bar so that it's lightweight but rugged.
• The 72" length allows you to create a pilot hole at the back of a Marker Post equipped with a Rockart Snow Pole Bracket, so the Snow Pole can be adjusted below the surface, and shortened when snow is not so deep. Securing your Snow Poles below the surface strengthens the Marker Posts during high winds when the snow is not deep enough to provide support.
• Powder coated for durability.

Powerlink 30 Rivet Tool

#08-600
Powerlink 30 Rivet Tool - for attaching our anchors to our Fiberglass Markers.
$57.00

6 Inch Vinyl-Coated Utility Clamp

#08-609
6" vinyl coated utility clamp to hold the Stainless Steel Drill Guide (#08-113) in place.
$4.50

3/16 Short Arm Hex Key - Drilled

#08-619
Special Drilled Hex Key
This Hex Key is drilled on both ends to easily install our part #08-800 (threaded fastener with short t-nut).
$3.50

Threaded Fastener With Short T-Nut

#08-800
1-3/4" x 1/4 - 20 Threaded Fastener with Short T-Nut.
Ideal for attaching our U-Channel Post Markers to U-Channel posts. Tamper-resistant. (For easy installation, see our part #08-618 or #08-619, specially drilled Hex Key tools, which can be ordered separately.) Price is per each threaded fastener system.
$0.54